Cold crashing means chilling a fermented beer to near freezing for a day or more before packaging it. At low temperatures, yeast, proteins and hop particles clump together and sink, and beers that would take weeks to clear on their own come out bright in a couple of days.
What it does
- Drops yeast. Most strains settle quickly once they're cold. Less yeast in the package means a cleaner flavour and less sediment in the bottle.
- Drops hop debris. Particularly useful after a big dry hop.
- Clears chill haze. The proteins and polyphenols that make beer go hazy in the fridge clump together when cold and settle out, so the finished beer stays clearer when you serve it cold.
- Firms up the trub at the bottom of the fermenter, so you leave more of it behind when you transfer.
How to do it
- Make sure fermentation is finished. The gravity should be steady for two or three days. Cold crashing an unfinished beer stalls the yeast and leaves it sweet — or creates bottle bombs later.
- Chill the fermenter to 0 to 4 °C. A fridge with a temperature controller is ideal.
- Hold it there for one to three days. Most of the benefit comes in the first 24 to 48 hours.
- Package it cold, being careful not to stir up the sediment.
The trap: suck-back
As the beer cools, the gas in the fermenter's headspace contracts. That creates a vacuum, and the vacuum pulls on the airlock — dragging whatever liquid is in it back into the beer, followed by air.
A little sanitiser in your beer won't hurt you, but it isn't nice, and the air that follows brings oxygen, which stales beer, especially hoppy beer.
Ways to avoid it:
- Fill the airlock with sanitiser, not water, so whatever gets sucked in is at least sanitary.
- Swap the airlock for sanitised foil or a solid bung once fermentation has finished. The beer is protected by its own CO₂ for a few days.
- Use a pressure fermenter sealed with a little head pressure. The pressure just drops slightly as it cools, and nothing gets pulled in.
- Feed CO₂ into the headspace while it chills, if you have a gas setup.
Bottling after a cold crash
People worry that cold crashing will drop out all the yeast and their bottles won't carbonate. In practice, enough yeast stays in suspension to carbonate the bottles normally. Carbonation might take a few days longer. Let the beer warm up a little before bottling so the priming sugar dissolves evenly, and keep the bottles around 18 to 22 °C for two weeks.
Kegging after a cold crash
If you keg, cold crashing is almost automatic: the keg goes into the fridge anyway and the beer clears there. Crashing in the fermenter first just means less sediment ends up in the keg and the first few pours are clearer.
Fining while you crash
Adding a fining agent such as gelatine during the cold crash speeds up clearing even further. Dissolve it in warm water, add it once the beer is cold, and give it a day or two. It's particularly effective on stubborn haze.
Is it worth the fridge space?
Worth it for:
- Heavily dry-hopped beers, where it clears out hop debris.
- Lagers and light beers, where clarity matters.
- Anyone who bottles and wants less sediment.
Not essential for:
- Stouts, porters and dark beers, where clarity is invisible.
- Hazy IPAs, which are meant to be cloudy.
- Kegged beers going into a fridge anyway.
If you don't have a spare fridge, time does much the same job. A beer left in the fermenter for an extra week at a cool, steady temperature clears substantially on its own. The cold crash just gets you there faster.
If you're weighing up a fermentation fridge, the fermentation temperature guide makes the case for one — and cold crashing is a nice bonus once you have it.