Dry hopping means adding hops to the beer after the boil, usually in the fermenter. Because there's no heat, the alpha acids don't isomerise, so there's no added bitterness. What you get is aroma, and lots of it — the hop oils dissolve straight into the beer instead of boiling away.

When to add them

There are two schools of thought, and both work.

After fermentation slows. The classic approach. Wait until the gravity is close to final, usually day five to seven for an ale. The yeast has done its work and the hop aroma goes into a finished beer. You get a clean, fresh, true-to-variety aroma.

During active fermentation. Adding hops on day two or three, while the yeast is busy, has two effects. Rising CO₂ scrubs out some aroma, but some yeasts also transform hop compounds into new ones — often described as juicier and more tropical. This is called biotransformation, and it's part of the hazy IPA playbook. Active fermentation also uses up any oxygen the hops bring in.

Many brewers split the dose: a third during fermentation, the rest at the end.

Temperature

Somewhere between 15 and 20 °C suits most beers. Warm enough for the oils to dissolve quickly, cool enough to keep the more delicate aromas.

Cold dry hopping — adding hops after cold crashing, at 2 to 8 °C — extracts more slowly and needs a longer contact time, but tends to give a cleaner aroma with less grassy character. It's worth trying if your dry-hopped beers taste vegetal.

Contact time

Most of the aroma is extracted in the first 24 to 48 hours, especially if the hops get moving — a gentle swirl of the fermenter helps. Leaving them longer adds very little.

Past about five to seven days, things go downhill: grassy, vegetal and harsh flavours from the plant material start to creep in. Two to four days is the sweet spot.

How much

Rates are usually given in grams per litre. For a 23 litre batch:

Beer Rate For 23 litres
Pale ale 2–4 g/L 50–90 g
IPA 4–8 g/L 90–180 g
Hazy IPA 8–15 g/L 180–350 g
Lager with a hop accent 1–2 g/L 25–50 g

More isn't always better. Very high rates can give a harsh, astringent bite, and beyond a point the aroma stops getting stronger.

Hop creep

This one catches people out. Hops contain small amounts of enzymes that can break down unfermentable sugars into fermentable ones. Add hops to a "finished" beer and the yeast wakes up, ferments a little more, and the gravity drops a few points.

That has two consequences:

  • Bottle bombs. If you bottle straight after dry hopping and the gravity is still falling, the extra fermentation plus your priming sugar can over-carbonate the bottles. Check the gravity again after the dry hop and only bottle once it's stable for two or three days.
  • Diacetyl. The renewed fermentation can produce a buttery note. Keeping the beer at fermentation temperature for a couple of days after dry hopping gives the yeast time to clean it up.

Keeping oxygen out

Every time you open the fermenter, air gets in, and oxygen dulls hop aroma within days and darkens the beer. Hoppy beers are especially vulnerable.

  • Be quick. Lid off, hops in, lid on.
  • Dry hop while some fermentation is still happening, so the yeast mops up the oxygen.
  • Use a port or a pressure fermenter that lets you add hops without opening the lid.
  • Purge the headspace with CO₂ if you keg and have gas on hand.

Bags or loose?

Loose pellets give the best extraction because every bit of hop is in contact with the beer. They break down into sludge that settles to the bottom. A cold crash afterwards helps it drop.

A mesh bag keeps things tidy, especially in a keg or when transferring by tap. Use a big bag, don't pack it tight, and weight it with sanitised stainless items so it sinks. Expect slightly less aroma than loose.

Choosing hops for dry hopping

High-oil, aroma-focused varieties shine. Australian favourites like Galaxy, Vic Secret and Ella are superb in a dry hop, as are many American and New Zealand varieties. The Australian hops guide covers what each brings.

A worked schedule: a 23 litre IPA

Here's how a typical dry hop fits into a two-week IPA ferment with a clean ale yeast at 18 to 19 °C.

  • Day 0 — pitch the yeast. Original gravity around 1.062.
  • Day 2 — fermentation is vigorous. Add 40 g of hops for biotransformation. No need to worry much about oxygen; the yeast will use it.
  • Day 6 or 7 — the gravity has dropped to within a few points of final. Add the main dry hop, 100 to 120 g, as quickly as you can.
  • Day 8 — give the fermenter a gentle swirl to rouse the hops.
  • Day 9 or 10 — check the gravity. If it's still dropping, that's hop creep. Wait.
  • Day 10 or 11 — gravity steady for two days. Cold crash to 2 to 4 °C for two days to drop the hops and yeast.
  • Day 13 — package.

That puts the hops in contact with the beer for about four days at fermentation temperature — enough to extract the aroma, not long enough to turn grassy.

Getting the hop sludge out

Pellet hops break down into a fine green sludge, and some of it stays suspended. A cold crash does most of the work. A fining agent such as gelatine, added during the cold crash, clears the rest — although some brewers find it also strips a little hop aroma, so try it on half a batch first. If your fermenter has a tap, raise it slightly or tilt the fermenter as you draw off to leave the sludge behind.

Troubleshooting

The aroma faded within a week or two. Oxygen is the most likely cause. Look at how the hops went in and how the beer was packaged. Hoppy beers kept warm also fade faster — store them cold.

It tastes grassy or vegetal. The hops were in for too long or at too high a rate, or the hops were old. Cut contact time to two or three days and check your hop storage.

There's a harsh, scratchy bitterness. Very high dry hop rates can do this, especially with hops high in polyphenols. Reduce the rate or split it across two smaller additions.

The aroma is weaker than expected. Check the hops were fresh, that they were loose rather than packed tightly in a bag, and that fermentation wasn't so vigorous when you added them that the CO₂ scrubbed the aroma straight out.

Kegging after a dry hop

If you keg, you can leave a bag of hops in the keg for continuous aroma. Plenty of brewers love it. The risk is grassy flavours after a couple of weeks. Pull the bag out after five to seven days, or use a smaller dose.

A reliable dry hop routine

  1. Wait until fermentation is nearly finished for a classic dry hop.
  2. Use 3–5 g per litre for a pale ale, more for IPAs and hazies.
  3. Keep it at 15–20 °C for 2–4 days, then get the hops out.
  4. Check the gravity again before bottling — hop creep is real.
  5. Keep oxygen out: add hops quickly, or purge with CO2.