Mash thickness is simply how much water you use for each kilo of grain. It's written as litres per kilo — a 3 L/kg mash for 5 kg of grain uses 15 litres of strike water. Ask five brewers what it does and you'll get five answers, most of them overstated.
Typical ratios
| Ratio | Where you see it |
|---|---|
| 2.5–3 L/kg | Traditional mash tun with a separate sparge |
| 3–4 L/kg | All-in-one systems, which need room for recirculation |
| 4–7 L/kg | Full-volume brew in a bag, with no sparge at all |
All of these make good beer. Commercial breweries run anywhere from about 2.5 to 4 L/kg.
What a thicker mash changes
Enzyme stability. Enzymes are slightly more stable in a thick mash, so they last longer at higher temperatures. Some brewers report a fractionally more fermentable wort from a thick mash at the same temperature. The effect is small and inconsistent. Changing the temperature by a single degree makes a bigger difference.
pH. Grain buffers pH, so a thick mash holds its pH more stubbornly. A thin mash responds faster to salt and acid additions, which also means water chemistry has a little more influence.
Handling. Thick mashes are harder to stir and more prone to dough balls — dry pockets of grain that never convert. They also leave more room in the tun for sparge water, which is why traditional brewers favour them.
What a thinner mash changes
Easier mixing. Fewer dough balls, more even temperature, better contact between water and grain.
Better heat stability. More water means more thermal mass, so the mash holds its temperature better in a cold garage.
Simpler process. Full-volume brew in a bag uses all of the water up front and needs no sparge. You give up a few points of efficiency compared with a well-run sparge and gain an easier, shorter brew day.
What it doesn't do
It doesn't decide body. Mash temperature does, along with yeast choice and the grist. It doesn't make or break efficiency on its own either — crush and lautering matter far more. And it isn't a reason to abandon brew in a bag. Plenty of award-winning beer is mashed full-volume.
Strike temperature depends on it
The one place thickness genuinely matters day to day is strike temperature. Grain absorbs heat, and the less water there is, the more the grain pulls the temperature down. A thick mash needs hotter strike water than a thin one to land on the same temperature. The mash temperature guide has the formula.
Working out mash and sparge water
If you mash and sparge, thickness decides how your total water splits between the two. Here's the arithmetic for a 23 litre batch with 5 kg of grain.
- Total water needed = volume into the fermenter + grain absorption + boil-off + losses. Say 23 + 5 (grain holds about 1 L/kg) + 4 (an hour's boil) + 2 (kettle and tun losses) = 34 litres.
- Mash water = grain × ratio = 5 × 3 = 15 litres.
- Sparge water = total − mash = 34 − 15 = 19 litres.
Mash thinner and you have less sparge water to rinse with, which can cost a few points of efficiency. Mash thicker and you have more to sparge with but a stiffer, harder-to-stir mash. Around 3 L/kg balances the two.
Brew-in-a-bag skips step 3 entirely — all 34 litres go in at the start, which is why full-volume mashes run at 6 to 7 L/kg.
Thick versus thin in practice
Brewers who've tested the same recipe at different thicknesses tend to report the same thing: small, inconsistent differences in final gravity, and no reliable difference that tasters can pick blind. That doesn't mean thickness does nothing. It means its effect is smaller than the normal batch-to-batch variation from crush, temperature and fermentation.
So if you're chasing a particular body or dryness, adjust the mash temperature first. If you're chasing efficiency, look at the crush and the sparge. Thickness is the dial to set once and leave alone.
A sensible default
- Mash tun with a sparge: 3 L/kg. Thin enough to stir easily, thick enough to leave room for sparging.
- All-in-one system: whatever the manufacturer recommends for the recirculation pump, usually 3 to 3.5 L/kg plus the system's dead space.
- Brew in a bag: full volume, and stop thinking about it.
Pick one, keep it consistent, and spend your attention on things that change the beer more. If a mash is giving you trouble — dough balls, stuck runoff, temperature drifting — bring the details in and we'll work out whether thickness is actually the culprit.
Very big beers
The one case where thickness can force your hand is a high-gravity beer in limited gear. A barley wine or imperial stout can need so much grain that a normal ratio won't fit in the mash tun. Mashing thicker, mashing a smaller batch, or topping up with malt extract are all reasonable answers.