Sour beers get their tartness from lactic acid, made by bacteria — mostly Lactobacillus and Pediococcus — or by certain specialist yeasts. Some traditional sour beers also use Brettanomyces, a wild yeast that adds funky, earthy and fruity character.

The worry is that these microbes can survive in scratches and crevices in plastic equipment and turn up in your next pale ale. The good news is that the two easiest methods never put live bacteria anywhere near your fermenter.

Method 1: kettle souring

Kettle souring sours the wort before the boil. The boil then kills the bacteria, so the fermenter only ever sees normal brewing yeast. It's fast, predictable and completely safe for your gear.

  1. Brew a simple, light wort — pale malt and wheat, around 1.040 to 1.050. Don't add hops yet: Lactobacillus is very sensitive to hops, and even a few IBU can stop it working.
  2. Boil it briefly — 10 to 15 minutes — to sanitise it, then cool it to the temperature your Lactobacillus culture prefers. Many work best around 30 to 40 °C; check the packet.
  3. Pre-acidify to about pH 4.5 with food-grade lactic acid. This is important: it gives the Lactobacillus a head start and stops other bacteria getting established.
  4. Pitch the Lactobacillus.
  5. Keep oxygen out. Cover the surface with cling film, or purge the headspace with CO₂. Oxygen encourages bacteria that make unpleasant smells.
  6. Hold the temperature for 24 to 72 hours, measuring the pH. Most brewers aim for pH 3.2 to 3.5. Taste as you go.
  7. When it's sour enough, boil it for a normal 60 minutes, adding hops now. This kills the bacteria.
  8. Chill and ferment with a clean ale yeast as you would any beer.

The result is clean, tart and refreshing — the basis for Berliner weisse, gose and fruited sours. Holding wort warm for two days is the only tricky part; an urn with a thermostat, a heat belt, or an insulated esky all work.

If it smells bad — cheesy, like vomit or rotten vegetables — other bacteria got in, usually because the wort wasn't pre-acidified or oxygen got to it. Don't use it.

Method 2: souring yeast

The simplest method of all. A few specialist yeasts produce lactic acid as well as alcohol during a normal fermentation — Lallemand's Philly Sour is the best-known example. Pitch it like any other yeast, ferment as usual, and the beer comes out tart.

There are no bacteria involved, so it's completely safe for your gear, and there's no extra step on brew day. The trade-off is less control over the final acidity than kettle souring, and a slightly different character. Ask us what's in the yeast fridge.

Method 3: mixed fermentation

This is the traditional way, and it's where the reputation comes from. Lactobacillus, Pediococcus and Brettanomyces are pitched into the fermenter, either together or in stages, and the beer ages for months — sometimes years — while they slowly develop acidity and complexity.

It makes extraordinary beer, but it needs care.

  • Keep dedicated soft plastics. Anything plastic or rubber that touches the mixed culture — fermenter, tubing, bottling wand, siphon, bungs, tap — should be kept for sour beers only and clearly labelled. Brettanomyces in particular can survive in scratches that sanitiser can't reach.
  • Glass and stainless steel can be shared if cleaned and sanitised thoroughly, because they don't scratch in the same way.
  • Use heavier bottles. Brettanomyces slowly ferments sugars that brewing yeast leaves behind, so carbonation can keep rising for months. Make sure the beer is truly finished before bottling.
  • Be patient. Six months is a short time for a mixed fermentation.

Adding fruit

Fruit and sour beer belong together. Raspberries, cherries, passionfruit, mango and stone fruit are popular. Add fruit to the fermenter after primary fermentation has slowed — 100 to 300 grams per litre is a typical range — and expect a short refermentation as the yeast eats the fruit sugars. Frozen fruit works well and is often easier to sanitise than fresh.

Measuring sourness

A pH meter is the right tool. Taste alone is unreliable, because sourness perception changes with sweetness, carbonation and temperature. For context:

Beer Typical pH
Clean pale ale 4.2–4.5
Gently tart 3.6–3.8
Clearly sour 3.3–3.5
Very sour 3.0–3.2

Calibrate the meter before each session. The mash pH guide explains how.

Serving and storing

Kettle sours and souring-yeast beers are at their best fresh, while the fruit and the acidity are bright — drink them within a few months and keep them cold. Mixed-fermentation sours are the opposite: they keep developing in the bottle for a year or more, so store a few and taste one every few months. Serve sours cold in a stemmed glass, and pour gently if there's sediment.

Keeping the rest of your brewing clean

  • Kettle sours and souring yeast need nothing special beyond normal sanitation.
  • Mixed fermentation needs separate, labelled soft gear and a habit of cleaning sour equipment last.
  • Don't harvest yeast from a fermenter that's been used for mixed cultures.

A kettle-soured Berliner weisse, 23 litres

Amount
Pilsner malt 2.0 kg
Wheat malt 1.6 kg
Mash 66 °C for 60 minutes
Pre-boil 10 minutes, no hops
Cool to the temperature your Lactobacillus prefers, often 35–40 °C
Pre-acidify lactic acid to about pH 4.5
Sour 24–48 hours, to pH 3.2–3.4
Final boil 30–60 minutes
Hops a small addition for about 5 IBU, or none
Yeast a clean ale strain

At around 72 percent efficiency that gives an original gravity near 1.034, finishing around 1.006 for roughly 3.5 to 4 percent. Ferment at 18 to 20 °C and carbonate high — around 3 volumes — for the spritzy character the style is known for.

It's delicious plain, and it's the perfect base for fruit. Add passionfruit pulp or raspberries after primary fermentation, or follow the old German habit of serving it with a dash of raspberry syrup in the glass.

Where to start

Brew a kettle-soured Berliner weisse first — about 3 to 4 percent, pale, tart and refreshing, with fruit or not. It's quick, safe for your gear, and teaches you how acidity works. If you get hooked, the long road of mixed fermentation will still be there.

Sour brewing essentials

  1. A pH meter, calibrated, or narrow-range pH strips.
  2. Food-grade lactic acid for pre-acidifying.
  3. A Lactobacillus culture or a souring yeast.
  4. A way to hold wort warm for a day or two.
  5. Separate, labelled soft plastics if you try mixed fermentation.