A starter is a small batch of wort — usually a litre or two — that you pitch your yeast into a day or two before brewing. The yeast multiplies in the starter, and on brew day you pitch a much larger, healthier population into the main batch.
Whether that's worth doing depends almost entirely on the kind of yeast you're using and the beer you're making.
Dry yeast: almost never
A standard 11.5 g sachet of dry yeast contains a lot of cells — manufacturers typically guarantee at least six billion per gram, and real counts are often higher — and it's packed with the reserves it needs to get going. Dry yeast isn't designed to go into a starter; doing so mostly uses up those reserves without adding much.
If you need more yeast than one sachet provides — for a lager or a strong ale — pitch two sachets. It's simpler, cleaner and usually cheaper than a starter.
Liquid yeast: often
Liquid yeast comes in smaller populations, typically around 100 billion cells when it's freshly made, and that number falls steadily as the pack ages — something like a fifth every month in the fridge. A two-month-old pack might have 60 billion healthy cells.
For a normal-strength 23 litre ale, you want roughly 200 billion. So a single fresh liquid pack is already slightly underpitched, and an older one more so. A starter brings the count back up. The pitching rates guide explains how to work out the number.
When a starter really matters
- Lagers. They need about twice as much yeast as ales because they ferment cold.
- Strong beers. Anything over about 1.065 benefits from more yeast.
- Older liquid yeast. Check the manufacturing date. A pack more than a couple of months old almost always benefits from a starter.
- Harvested yeast that's been in the fridge a few weeks. See the yeast washing guide.
- Delicate styles where clean fermentation matters — a Kölsch, a pilsner, a light lager.
When you can skip it
- Any beer made with fresh dry yeast.
- A normal-strength ale with a very fresh liquid pack, if you accept a slightly slower start and a little more yeast character.
- Hefeweizens and some Belgian beers, where a modest underpitch can actually boost the fruity, spicy character you're after — within reason.
How to make a one-litre starter
- Mix 100 g of light dry malt extract into 1 litre of water. This gives a starter of around 1.036 to 1.040, which is what yeast likes.
- Boil for 10 minutes to sanitise it. Watch it — malt extract foams up fast.
- Cool it to room temperature, covered. A sink of cold water speeds this up.
- Pour it into a sanitised flask or jar and add the yeast.
- Cover with foil or a foam stopper — you want air to get in, not bugs.
- Keep it at room temperature for 24 to 36 hours. Put it on a stir plate if you have one; otherwise give it a good swirl whenever you walk past.
- Pitch it. Either pitch the whole lot when it's active, or put it in the fridge overnight so the yeast settles, pour off most of the spent liquid, and pitch just the yeast slurry.
The decant method is better for light beers because the starter liquid itself tastes stale and oxidised. For dark or hoppy beers, pitching the whole starter makes no noticeable difference.
How much does a starter grow?
Roughly speaking, a one-litre starter on a stir plate will take a fresh 100 billion cell pack to around 200 billion. Without a stir plate, with regular shaking, expect a bit less. A two-litre starter grows more. Online yeast calculators will give you a specific figure for your pack date, starter size and method.
Stir plates
A stir plate keeps the yeast in suspension and constantly mixes in oxygen, which roughly doubles the growth compared with a starter left still. If you brew lagers or use liquid yeast regularly, it pays for itself quickly.
The honest verdict
If you use dry yeast, you don't need starters. Buy an extra sachet for big beers and lagers and move on. If you use liquid yeast — and the range of strains is a good reason to — a starter is worth the effort for anything bigger than a standard ale, and for any pack that isn't very fresh.
Everything for a simple starter
- Light dry malt extract — 100 g per litre of starter.
- A conical flask or a large, sanitised glass jar.
- Foil or a foam stopper to cover it.
- A stir plate if you make starters often; shaking works too.
- Fresh liquid yeast — check the date on the pack.