Reusing yeast is how breweries have always worked. It saves money, especially with liquid yeast, and it lets you keep using a strain you like. It also asks more of your sanitation than almost anything else in home brewing, because you're carrying living culture from one batch to the next.
Is it worth it?
For liquid yeast, often. A good liquid strain costs several times as much as a dry sachet, and the strain range is the main reason to use liquid yeast at all. Harvesting stretches one pack across several batches.
For dry yeast, usually not. A fresh sachet is cheap, reliable and clean. Reusing it saves a few dollars at the cost of some risk.
When not to harvest
- From a beer that had any sign of infection — sourness, film on top, off-flavours.
- From a very strong beer — over about 1.075. The yeast is stressed and tired.
- From a heavily dry-hopped beer, unless you can separate the yeast from the hop debris. It's doable, but messier.
- From a beer fermented with a blend if you want predictable results.
- From a beer that sat on the yeast for weeks at warm temperatures.
The ideal donor is a normal-strength, cleanly fermented beer — a pale ale or a lager of around 1.040 to 1.055.
What you need
- Several clean glass jars with lids — 500 mL or 1 litre.
- Water that's been boiled and cooled, a few litres of it.
- No-rinse sanitiser.
- A marker for labelling.
Sanitise everything that will touch the yeast. The sanitising guide explains how.
Harvesting
- Package the beer as normal — bottle or keg it, leaving the yeast cake behind.
- Pour a litre or so of boiled, cooled water onto the yeast cake left in the fermenter.
- Swirl it vigorously to lift everything off the bottom into a slurry.
- Pour the slurry into a large sanitised jar and cover it loosely.
Washing
The slurry is a mix of healthy yeast, dead yeast, proteins and hop debris. Washing separates them by how fast they settle.
- Leave the jar to stand for 20 to 30 minutes. You'll see layers form: a dark, dense layer of trub and hop material at the bottom, a creamy pale layer of yeast above it, and cloudy liquid on top.
- Gently pour the cloudy liquid and the creamy middle layer into a second sanitised jar, leaving the dark bottom layer behind.
- Repeat once or twice if there's still a lot of debris.
- Divide the result into smaller jars, fill them up with boiled, cooled water, and put the lids on.
Over a day in the fridge the yeast settles into a firm, creamy white layer under clear liquid.
Storing
- Keep it in the fridge, around 2 to 4 °C.
- Label every jar with the strain, the date, the beer it came from and the generation number.
- Loosen the lids for the first day so any CO₂ can escape, then tighten.
- Use it within two to four weeks for best results. Yeast loses vitality in storage. After about a month, viability has dropped enough that a starter becomes important.
Pitching harvested yeast
Thick, settled slurry contains very roughly 1 to 2 billion cells per millilitre. For a normal-strength 23 litre ale you want about 200 billion, so something like 150 to 200 mL of thick slurry is a reasonable guide. For a lager, double it. A yeast calculator gives a better figure if you know how old the slurry is.
If the slurry is more than a couple of weeks old, or you're brewing a lager, make a starter the day before. It wakes the yeast up and confirms it's alive and clean before you trust it with a whole batch.
Before pitching, let the jar warm up to room temperature, pour off most of the clear liquid on top, swirl up the slurry and pitch it.
Why not just pitch onto the old yeast cake?
It's tempting to package a beer and pour fresh wort straight onto the yeast cake left in the fermenter. It works, in the sense that fermentation starts almost instantly. But it's a big overpitch — a whole batch's worth of yeast for one batch of wort — and you're also pitching onto the old trub, hop debris and dead yeast.
The beer tends to ferment very fast and hot, with less yeast character than you'd expect, and sometimes picks up a slightly yeasty, muddy flavour. If you do it, use only a portion of the cake, keep the temperature well controlled, and only do it from a light, clean beer into a similar or darker one.
Keeping records
A simple log makes reusing yeast far more reliable. For each jar, note:
- The strain and where it came from — the original pack and its date.
- The generation — the original pack is generation zero; the first harvest is generation one.
- The beer it was harvested from, its gravity and how the fermentation went.
- The date it was harvested.
When a strain starts behaving oddly, the record tells you how many generations it's been through and whether the change coincided with a particular batch.
How many generations?
Home brewers commonly reuse a strain for five to ten generations. Over time, yeast can drift — changing how fruity it is, how well it settles and how far it ferments — and every transfer is a chance for contamination. When a strain starts behaving differently, or after about half a dozen batches, start again with a fresh pack.
A cleaner alternative: overbuild your starter
Instead of harvesting from the fermenter, some brewers make a starter slightly bigger than they need and save a portion in a sanitised jar before pitching. That yeast never touched hops, trub or alcohol, so it's very clean. Next time, use the saved portion to start a new starter, and save a portion again. It's an elegant way to keep a liquid strain going for months.
Signs something's wrong
Throw the yeast out if it:
- Smells sour, rotten or like nail polish remover rather than bready and clean.
- Has an unusual colour — grey, pink or green.
- Has a film or mould on the surface.
- Doesn't produce visible activity in a starter within a day or so.
When in doubt, start fresh. A new pack costs less than a ruined batch.