The mill is the least glamorous step in all grain brewing and one of the most important. Get the crush wrong and no amount of care later in the day will fully fix it.
What a good crush looks like
The goal is to break the starchy inside of each kernel into small pieces while keeping the husk as intact as possible. Tip a handful of well-crushed grain into your palm and you should see:
- Husks mostly in one or two large pieces, not shredded.
- The starchy endosperm broken into grits — coarse pieces with some flour.
- Very few whole kernels. Any uncrushed grain is sugar you've paid for and won't get.
The intact husks matter because in a traditional mash tun they form the filter bed that wort drains through. Shred them, and the bed packs down into a paste.
Too coarse, too fine
Too coarse leaves chunks of endosperm the enzymes can't fully reach, plus the odd whole kernel. Wort drains beautifully, the gravity comes up short, and the efficiency number disappoints.
Too fine gives fast, thorough conversion, but the flour and shredded husk compact into a dense layer. Runoff slows to a trickle or stops — the classic stuck sparge. Very fine crushes can also pull more husk tannins into the wort.
The sweet spot depends almost entirely on how you mash.
The gap to ask for
| How you mash | Typical gap | Why |
|---|---|---|
| Mash tun with false bottom or manifold | 0.9–1.1 mm | Husks need to stay intact for the filter bed |
| All-in-one electric system with a malt pipe | 0.9–1.0 mm | Recirculation needs free-flowing grain |
| Brew in a bag | 0.6–0.8 mm | The bag is the filter, so you can crush finer |
A plastic credit card is about 0.76 mm thick, which is a handy reference if you're adjusting your own mill.
When you buy grain from us by the kilo or the sack, tell us how you mash and we'll crush it to suit. If you've had a stuck sparge or low efficiency on your last batch, mention that too.
Wheat, oats and rye
Wheat and rye have no husk, and oats bring a lot of sticky gums. A grist heavy in any of them drains slowly however you crush it. A handful of rice hulls — around 3 to 5 percent of the grist — adds filter material back in without affecting flavour. Brew-in-a-bag brewers can usually skip them.
Freshness
Crushed grain starts to stale as soon as it's milled. The flavours fade and it picks up moisture. Use it within a week or two, and keep it sealed somewhere cool and dry until brew day. Whole grain keeps for many months, which is why brewers with their own mills buy uncrushed.
If you mill at home
Two-roller mills are the common home choice; three-roller mills crush more evenly at a given gap. A few habits help:
- Check the gap with feeler gauges at both ends of the rollers. Uneven gaps are common and cause inconsistent crush.
- Change one thing at a time. Narrow the gap in small steps over several brews and record the efficiency each time.
- Condition the grain if you're keen: a light mist of water — about 2 percent of the grain's weight — stirred through ten minutes before milling makes husks more pliable so they survive the rollers.
Getting the crush right
- Tell us how you mash — bag, mash tun or all-in-one — when you buy grain.
- Brew within a week or two of crushing.
- Keep rice hulls on hand for wheat- or oat-heavy grists.
- Change the gap one step at a time and record the result.
The short version
Bag brewers can crush finer for better efficiency. Mash-tun brewers need intact husks for a free-running sparge. If you're not sure where you sit, bring a sample of your last crush in and we'll take a look.