Steeping is like making tea. You soak crushed specialty grain in hot water, lift it out, and add the liquid to your brew. It adds colour, flavour, body and aroma that a kit or plain extract can't give you on its own, and it takes about half an hour.

Steep or mash?

The key question is whether the malt still contains starch that needs converting.

You can steep these. Their sugars were already converted inside the kernel during malting, or they're there for colour and flavour rather than sugar.

  • Crystal and caramel malts, from very light to very dark.
  • Roasted malts — chocolate malt, black malt, roasted barley.
  • Carapils and similar dextrin malts, for body and head retention.

These need mashing. They contain starch, and steeping them just adds starch haze and a raw, grainy flavour.

  • Base malts — pale, pilsner, Maris Otter.
  • Munich, Vienna and other kilned malts.
  • Biscuit, aromatic and other toasted malts — mostly.
  • Wheat malt, oats and rye.

If a recipe calls for any of these alongside a kit, it needs a small partial mash rather than a steep.

How to steep

  1. Get the grain crushed. Whole grain gives very little. Ask for it crushed when you buy it.
  2. Heat water — about 3 to 5 litres for every kilo of grain — to about 70 °C.
  3. Steep in a bag. Put the grain in a fine mesh bag and submerge it. Hold between 65 and 75 °C for 20 to 30 minutes.
  4. Don't go too hot. Above about 77 °C, steeping pulls harsh tannins from the husks.
  5. Lift and drain. Rinse the bag with a litre of hot water and let it drip. Squeeze it gently if you like.
  6. Boil the liquid for at least 10 to 15 minutes. That sanitises it, and it's a natural time to add hops if you're boiling them.
  7. Add it to your kit or extract, top up with treated water to volume, cool and pitch as usual.

How much to use

For a standard 23 litre kit or extract batch:

Grain Amount What it does
Light crystal (around 20–60 EBC) 200–400 g Body, honey and light caramel, a touch of colour
Medium crystal (around 120–150 EBC) 150–300 g Caramel, toffee, amber colour
Dark crystal (240 EBC and up) 100–250 g Raisin, dark fruit, burnt sugar, deep red-brown
Carapils / dextrin malt 150–300 g Body and head retention, little flavour
Chocolate malt 100–250 g Chocolate and coffee, dark colour
Roasted barley 100–250 g Dry, sharp roast — the classic stout note

Start at the low end. Crystal malt adds sweetness as well as body, and too much makes a beer cloying. More than about 500 g of crystal in a 23 litre batch is usually too much.

Matching grain to style

  • Pale ale or lager kit — 250 g light crystal and 150 g carapils for body without much colour.
  • Amber or red ale — 300 g medium crystal and a pinch of dark crystal.
  • Brown ale or English bitter — medium and dark crystal with a little chocolate malt.
  • Stout or porter kit — 200 g roasted barley or chocolate malt on top of the kit's dark malt.

Reading a malt description

Malt colour is given in EBC in Australia and Europe, and in Lovibond or SRM on American recipes. To convert, EBC is roughly twice the SRM or Lovibond figure. So a "60 L" crystal on an American recipe is about 120 EBC — a medium crystal.

The colour also tells you the flavour. Light crystal tastes of honey and light caramel. As the colour deepens, it moves through toffee and burnt sugar to raisin and prune. Roasted malts go from milk chocolate and coffee to the sharp, dry, almost ashy note of roasted barley.

Malt names vary between maltsters, so a recipe calling for a particular brand of crystal can almost always be matched by colour from another. Bring the recipe in and we'll find the closest equivalent on the shelf.

Steeping with a kit versus with extract

With a kit, the tin already contains bittering hops and some colour. Steeping adds body and flavour on top, so go lightly — a few hundred grams is plenty. Keep the steeped liquid's boil short and skip extra bittering hops, or the beer ends up more bitter than the kit intended.

With unhopped malt extract, you're building the whole beer. The steeped liquid becomes the base for a proper hop boil, and you have full control of bitterness and flavour. This is extract brewing proper, and it can make beer every bit as good as all grain.

Partial mash in a nutshell

If a recipe needs malts that can't be steeped — Munich, biscuit, oats — a partial mash bridges the gap. Add 1 to 2 kg of pale base malt to those specialty grains, hold the lot at 65 to 67 °C for 45 to 60 minutes in a bag, then lift, rinse and carry on as for steeping. The enzymes in the base malt convert the starch in the other grains. Top up the fermentables with extract.

It's a short step from there to full brew in a bag.

Freshness

Crushed specialty grain loses aroma over a few weeks. Buy it close to brew day and store it sealed, somewhere cool and dry.

Your first steeping grains

  1. Light crystal for body and honey-caramel sweetness in pale beers.
  2. Medium or dark crystal for ambers, reds and English ales.
  3. Chocolate malt or roasted barley for porters and stouts.
  4. A fine mesh grain bag and a thermometer.
  5. Ask us to crush them — whole grains give very little.

Where it leads

Steeping is often the first step towards all grain. Once you're comfortable with it, a small partial mash with some base malt is the next step, then brew in a bag. If you'd like help picking grains for a particular kit, bring the tin in and we'll suggest a combination.