Scaling comes up all the time. You find a 19 litre American recipe and brew 23 litres. You want a 10 litre test batch on the stove. You move from a 23 litre system to a 40 litre one. Multiply everything by the same number and the beer usually comes out close — but rarely the same.

Grain: scale by volume, then correct for efficiency

Start by scaling the grain in proportion to the batch size. Then correct for the difference between the recipe's efficiency and yours.

New grain = original grain × (new volume ÷ original volume) × (original efficiency ÷ your efficiency)

Example: a recipe calls for 5.0 kg of grain for 19 litres at 75 percent efficiency. You brew 23 litres at 70 percent.

5.0 × (23 ÷ 19) × (75 ÷ 70) = 5.0 × 1.21 × 1.07 = about 6.5 kg.

Scale every grain by the same factor so the proportions — and the colour and flavour — stay the same.

If the recipe doesn't state an efficiency, look at its original gravity instead, and adjust the base malt in your software until you hit the same gravity at your volume.

Hops: scale by volume, then check the bitterness

As a first step, scale the hops by volume. Then let the software recalculate the IBU, because utilisation isn't constant between systems.

  • Small batches often get higher utilisation. A small pot boils more vigorously relative to its volume.
  • Boil gravity matters. If your scaled boil is more concentrated or more dilute than the original, utilisation changes.
  • Whirlpools cool at different rates. A 10 litre whirlpool drops temperature much faster than a 40 litre one, so it adds less bitterness and extracts less aroma.

The aim is to match the IBU, not the weight. If the scaled recipe calculates 5 IBU higher than the original, trim the bittering addition.

Dry hops scale simply by volume — grams per litre stays the same.

Water: don't scale the boil-off

This is the part people miss. Boil-off depends on your kettle and burner, not on your batch size. A kettle that evaporates 4 litres an hour does so whether it holds 15 litres or 30.

So when you scale, work out your water from scratch:

Total water = batch volume + grain absorption + boil-off + losses

Grain absorption scales with the grain weight. Losses to dead space and trub depend on your equipment. Boil-off depends on your kettle. A scaled 10 litre stovetop batch might evaporate 2 to 3 litres an hour; a 40 litre urn might evaporate 4 to 5.

Water salts: scale with the water

Salt additions scale directly with water volume. If a recipe adds 6 g of gypsum to 30 litres and you're using 15, add 3 g.

Yeast: scale by cells, not sachets

Halving a recipe doesn't mean half a sachet. Work out how many cells you need for the new volume and gravity, and pitch that. The pitching rates guide has the formula.

In practice: one fresh dry sachet comfortably covers a 10 litre batch of most beers — a slight overpitch does no harm — and covers a normal-strength 23 litre ale. Double batches need double the yeast.

Other things that change with size

  • Chilling time. Small batches chill much faster, which helps clarity and cuts the time hops spend in hot wort.
  • Fermentation heat. A larger batch produces more heat and holds it longer, so temperature control matters more.
  • Headspace. A small batch in a large fermenter has a lot of air above it. That's fine during fermentation, when CO₂ fills it, but it can let oxygen in afterwards.

Scaling from commercial recipes

Brewery recipes are written for hundreds or thousands of litres. Ignore the weights and work from percentages and targets instead: the percentage of each grain in the grist, the original and final gravity, the IBU and the hop additions by timing. Enter those into your software at your batch size and build the recipe up from there.

Check the result

After scaling, check the software's predicted gravity, colour, IBU and bitterness ratio against the original. If they match, you've scaled it well. Brew it, take good notes, and adjust next time based on what you actually got.