Kit and kilo — a tin of hopped malt extract plus a kilo of sugar or brew enhancer — is how most Australian home brewers start. It's quick, easy and reliable. But it's easy to make it a lot better without buying new equipment. Here's the order we'd do it in.
1. Control the fermentation temperature
Cost: nothing to very little. Impact: enormous.
This is the single biggest improvement for almost every kit brewer on the South Coast. Warm fermentation is the cause of most solvent, banana and harsh flavours in home brew.
Aim for 18 to 20 °C for most ales. In summer, move the fermenter to the coolest spot in the house, stand it in a tub of water with frozen bottles, or use a wet towel and a fan. In winter, keep it out of a freezing garage. The fermentation temperature guide covers the options.
2. Change the yeast
Cost: a few dollars a batch. Impact: large.
The yeast taped under the kit lid is usually small, generic and may have been warm on a shelf for months. Replace it with a fresh 11.5 g sachet of a good-quality yeast chosen for the style — a clean ale yeast for a pale ale, a lager yeast for a lager kit you can keep cold, an English strain for a bitter.
3. Swap sugar for malt
Cost: a little more per batch. Impact: large.
Plain dextrose ferments out completely, leaving a thin body and sometimes a cidery edge. Replace it with light dry malt extract or a malt-based brew enhancer. The beer gets more body, better head retention and a rounder flavour.
4. Use a hydrometer and be patient
Cost: a hydrometer. Impact: large.
Bottle only when the gravity has been steady for two or three days — not on a fixed day count. Then give the bottles at least two weeks to carbonate and longer to condition. Much of what people call "home brew taste" is beer bottled too early and drunk too young.
5. Add hops
Cost: a pack of hops. Impact: medium to large, especially for pale ales.
- A late boil: boil 15 to 25 g of hops in two litres of water for 10 to 15 minutes and add it to the fermenter.
- A dry hop: add hops directly to the fermenter for the last few days. Pure aroma, no bitterness.
See hop utilisation and dry hopping.
6. Treat your water
Cost: a packet of campden tablets. Impact: medium.
Shoalhaven water is chlorinated, and chlorine causes medicinal flavours. Half a crushed campden tablet in all your brewing water fixes it. See the chlorine guide.
7. Steep specialty grains
Cost: a few hundred grams of grain. Impact: medium.
Steeping crystal or roasted malt adds body, colour and flavour a kit alone can't provide. The steeping grains guide explains how.
8. Try a fresh wort kit
Cost: more per batch than a tin. Impact: large.
Fresh wort kits contain real, unfermented brewery wort in a pouch — no extract, no boiling. Pitch your yeast and you get craft-quality beer with kit-level effort. It's the biggest single quality jump you can make without changing your process at all.
9. Extract brewing with a hop boil
Cost: a large pot. Impact: large.
Use unhopped malt extract and do your own full hop boil. You control the bitterness, flavour and aroma completely. It's a short step from steeping grains.
10. All grain
Cost: from a stockpot and a bag to a full electric system. Impact: total control.
Brew in a bag on the kitchen stove is the cheapest way in — see the stovetop BIAB guide. Many brewers find they enjoy the extra time on brew day. Others go back to kits and fresh wort and spend the saved hours drinking. Both are right.
Putting the first five together
Here's what a 23 litre pale ale kit looks like with the cheap upgrades applied.
- The kit tin, plus 1 kg of light dry malt instead of a kilo of dextrose.
- Half a campden tablet in all the water, including the top-up.
- 20 g of a late-boil hop, boiled for 10 minutes in 2 litres of water and added with the extract.
- A fresh 11.5 g sachet of a clean ale yeast, pitched at 18 °C.
- Fermented at 18 to 20 °C, using a water bath if the weather is warm.
- 20 g of the same hop as a dry hop on day five.
- Bottled once the gravity has been steady for three days, then conditioned for at least two weeks before the first taste.
The difference between that and the same kit made the basic way is dramatic — and the only new equipment is a hydrometer.
What not to spend money on first
Fancy gadgets, multiple fermenters and kegging all have their place, but none of them improve the beer as much as the first five steps above. Get the basics right, and every later upgrade works better.
Where to start
If you're not sure which upgrade suits the way you brew, bring your last beer in — or just a description of how you make it — and we'll suggest the next step.
The first five upgrades, in order
- Control fermentation temperature — even a wet towel and a fan.
- Swap the yeast under the lid for a fresh, quality sachet.
- Replace dextrose with dry malt or a malt-based brew enhancer.
- Add a late hop boil or a dry hop.
- Use a hydrometer and give the beer time to finish and condition.