There's no single "proper" Australian pale ale, which is part of the fun. For decades the phrase meant one beer above all: the cloudy, bottle-conditioned ale from Adelaide, with its fruity yeast and sediment you either roll into the glass or leave behind. Then the craft brewing boom gave us a second style — crisp, bright and bursting with Australian hops like Galaxy.
Both are worth brewing. Here's how.
The modern Australian pale ale
Bright gold, light-bodied, firmly but not aggressively bitter, with big passionfruit and citrus aroma from Australian hops. Easy to drink on a hot South Coast afternoon.
Targets: original gravity around 1.047, final gravity around 1.010, about 4.8 percent ABV, about 30 IBU, pale gold.
All grain, 23 litres
| Amount | |
|---|---|
| Pale ale malt | 4.4 kg |
| Wheat malt | 300 g |
| Light crystal malt (about 40 EBC) | 200 g |
| Mash | 66 °C for 60 minutes |
| Super Pride or another clean bittering hop, 60 minutes | about 15 IBU |
| Galaxy, 10 minutes | 20 g |
| Galaxy, whirlpool at 80 °C for 20 minutes | 40 g |
| Ella, whirlpool | 20 g |
| Galaxy, dry hop on day 5–6 | 40 g |
| Ella, dry hop | 20 g |
| Yeast | A clean American-style ale strain |
| Water | 6 g gypsum + 2 g calcium chloride in ~30 L |
At about 72 percent efficiency this lands around 1.047. Ferment at 18 °C, let it rise to 20 °C for the last few days, dry hop as fermentation slows, and package once the gravity is steady. Carbonate to about 2.5 volumes.
The wheat helps the head and gives a little softness; the light crystal adds just enough body to carry the hops. Most of the hops go in late, so the passionfruit aroma is big while the bitterness stays clean. Vic Secret works in place of Ella if you want more pineapple and resin.
The traditional bottle-conditioned pale
Hazy from yeast, fruity, with a firm, slightly earthy bitterness and a dry finish. Less about hop aroma, more about balance and the yeast.
Targets: original gravity around 1.048, final gravity around 1.008, about 5 to 5.2 percent ABV, 25 to 30 IBU.
- 4.2 kg pale malt and 200 g light crystal.
- 300 g of plain sugar added to the boil — traditional Australian ales used sugar to dry out the finish.
- Pride of Ringwood for most of the bitterness, with a small late addition for a little herbal aroma.
- A fruity ale yeast. The traditional choice is yeast cultured from the sediment of bottle-conditioned Coopers ale — a home brew tradition in its own right, covered in the clone brewing guide. A fruity English-style dry yeast gets you in the neighbourhood.
- Bottle-condition it with priming sugar or carbonation drops, and leave it at least three weeks.
The upgraded kit version
You don't need to brew all grain to make a very good modern pale ale.
- Start with a pale ale kit and 1 kg of light dry malt or a malt-based brew enhancer — not plain sugar.
- Boil 25 g of Galaxy in 2 litres of water for 10 minutes. Add the hops and liquid to the fermenter with the kit and malt.
- Top up to 23 litres with treated water, cool to 18 °C, and pitch a fresh 11.5 g sachet of clean ale yeast instead of the yeast under the lid.
- Dry hop with 25 g of Galaxy on day five or six.
- Bottle or keg once the gravity is steady.
It's not quite the all grain version, but it's a big step up from a kit made with sugar, and it takes about an hour of work.
Water matters here
Shoalhaven water is soft, which makes hop bitterness taste flat. The gypsum in the all grain recipe dries out the finish and makes the hops pop. Kit brewers can skip the salts, but treat the chlorine with a campden tablet either way. The Shoalhaven tap water guide explains.
Common problems
It's more bitter than expected. Check the alpha acid on your hops — Australian aroma varieties are often high in alpha acid, so a "flavour" addition can add more bitterness than you think. Move some of the 10 minute hops into the whirlpool, and keep the whirlpool below about 80 °C.
The passionfruit aroma faded within weeks. Oxygen or warmth. Dry hop quickly, package carefully, and keep the beer cold once it's carbonated. A pale ale like this is at its best in its first month.
It finished too sweet. Mash a degree or two lower, cut the crystal malt back to 100 g, or check the yeast is a reasonably attenuative strain. Make sure fermentation actually finished before packaging.
It's hazy when you wanted it bright. Give it a cold crash for two days before packaging. The wheat contributes a little haze, which is normal; most of it drops with time in the fridge.
It tastes a bit harsh or minerally. Ease back on the gypsum. Soft Shoalhaven water responds strongly to salts, and some palates prefer the 4 g end of the range.
Serving
Serve the modern version cold, around 4 to 6 °C, and fresh — hop aroma fades over weeks. Serve the traditional version a touch warmer, and decide for yourself whether to roll the sediment in. People have strong opinions.
What goes into a modern Aussie pale
- Pale malt with a little wheat and light crystal.
- Galaxy, plus Ella or Vic Secret, mostly added late.
- A clean ale yeast fermented at 18 °C.
- 6 g gypsum and 2 g calcium chloride in about 30 litres of Shoalhaven water.
- Carbonation of around 2.5 volumes.