Everyone makes these. We made most of them ourselves. Each one is easy to avoid once you know about it, and fixing them makes the difference between home brew that's "not bad for home brew" and beer you'd happily put next to anything at the bottle shop.
1. Fermenting too warm
What happens: the beer tastes of solvent, banana or something harsh and hot. It often gives people headaches.
Why: yeast working too warm produces fusel alcohols and esters. On the South Coast, an uninsulated garage can sit in the low thirties for weeks in summer, and fermentation itself adds a few degrees on top of that.
The fix: keep ales around 18 to 20 °C, especially in the first three days. Move the fermenter somewhere cooler, use a water bath with frozen bottles, or try a wet towel and a fan. This single change improves more beginner beers than anything else. The fermentation temperature guide has six options.
2. Pitching yeast into warm wort
What happens: the same as above, even if you control the temperature later.
Why: the first few hours set the tone for the whole fermentation. Yeast pitched into 28 °C wort gets a fast, hot, stressful start.
The fix: cool the wort to fermentation temperature before you pitch. If your tap water is warm, wait a few hours.
3. Skimping on sanitation
What happens: sour, vinegary, medicinal or just "off" flavours, sometimes gushing bottles.
Why: anything that touches the wort after the boil can introduce bacteria or wild yeast.
The fix: clean everything, then sanitise everything that touches cooled wort or beer, every time. Use a no-rinse acid sanitiser, not bleach. Never scrub plastic with a scourer. See the sanitising guide.
4. Too much sugar
What happens: a thin, dry, slightly cidery beer with little body and poor head.
Why: plain dextrose ferments out completely and adds alcohol without flavour or body.
The fix: use light dry malt or a malt-based brew enhancer instead of a kilo of sugar. It costs a little more and makes a dramatic difference.
5. Ignoring the chlorine
What happens: a medicinal, plastic or band-aid flavour.
Why: Shoalhaven tap water is chlorinated, and chlorine reacts with compounds in the beer to form chlorophenols.
The fix: crush half a campden tablet into your brewing water, including any top-up water. It costs a few cents. See the chlorine guide.
6. Using the old yeast under the lid
What happens: slow starts, sluggish fermentation and generic flavour.
Why: the sachet taped under a kit lid is usually small, generic and may have spent months on a warm shelf.
The fix: use a fresh 11.5 g sachet of a quality yeast suited to the style. Keep yeast in the fridge until you need it.
7. Bottling by the calendar
What happens: over-carbonated, gushing bottles — or, in the worst case, bottles that explode.
Why: the instructions say "bottle after seven days", but the beer isn't finished. Residual sugar plus priming sugar makes far too much gas.
The fix: use a hydrometer. Bottle only when the gravity has been steady for two or three days. The airlock is not a reliable guide. See the stuck fermentation guide for typical final gravities.
8. Opening the fermenter to check on it
What happens: oxidised, stale or infected beer.
Why: every time the lid comes off, oxygen and airborne microbes get in.
The fix: leave it alone. Measure gravity through the tap, or with a sanitised sampler. Fermentation looks alarming — foam, gunk, lumps — and that's all normal.
9. Drinking it too soon
What happens: "green" beer that tastes yeasty, harsh or sweet, and flat.
Why: bottle-conditioned beer needs about two weeks at 18 to 22 °C to carbonate, and more time to mature. Many beers are noticeably better at four to six weeks.
The fix: be patient. Put one bottle in the fridge at two weeks and try it, then compare with one at four weeks. Most people are surprised by the difference.
10. Changing everything at once
What happens: you can't tell what made a beer better or worse.
Why: if you change the yeast, the temperature, the malt and the hops between batches, you have no idea which change mattered.
The fix: change one thing at a time and keep notes — recipe, gravities, temperatures, dates, and what it tasted like. Your notebook becomes your best brewing tool.
A few honourable mentions
- Storing bottles in the light. Light makes beer skunky in hours. Keep bottles in the dark.
- Using clear or green bottles. Brown glass protects against light.
- Too much priming sugar. Measure it, or use carbonation drops — don't guess.
- Splashing beer when bottling. Splash wort before fermentation; never splash finished beer.
What a good first batch looks like
Put all ten fixes together and a first kit batch runs something like this.
- Brew day (an hour). Clean and sanitise. Treat the water with campden. Mix the kit with dry malt instead of sugar. Top up and cool to about 18 °C. Take an original gravity reading. Pitch a fresh sachet of yeast.
- Days 1 to 3. Keep it at 18 to 20 °C. Expect a thick, foamy head and a busy airlock — or no airlock activity at all if the lid seal leaks, which is fine.
- Days 4 to 7. Activity slows and the foam drops back. Resist opening it.
- Days 7 to 10. Take a gravity reading. Take another two or three days later.
- Gravity steady. Bottle, with measured priming sugar or carbonation drops, into clean, sanitised brown bottles.
- Two weeks later. Chill one bottle and try it.
- Four weeks later. Try another. Notice how much better it's become.
That's it. No special gear beyond a hydrometer, and a beer most people won't believe came out of a kit.
The good news
Every one of these is easy to fix, and fixing the first five alone will transform most first batches. If your beer has a problem you can't pin down, bring a bottle in. We'll taste it with you and help find the cause — no judgement, we've made all of these mistakes ourselves.
A first-batch checklist
- No-rinse sanitiser, used on everything after the boil.
- A campden tablet for the water.
- A fresh sachet of good yeast instead of the one under the lid.
- Malt or brew enhancer instead of plain sugar.
- A hydrometer, and the patience to use it.